DIY Layered Santa Soap (melt and pour)

It’s that time of year! I am one of these people who truly loves the holidays, I still feel the magic and excitement of the holidays. It probably helps that I always take two weeks off work at the end of the year, so that also gives me something to look forward to in addition to the holidays.

Over the years, I’ve come to learn that my homemade soaps are appreciated and looked forward to more than the presents that I buy my colleagues/friends/family. I now give a mixture of homemade items and bought items. As this soap is specifically Santa themed, they needs to given around the holidays, although I would find it utterly delightful if someone gave it to me in June, I do love when stores are eager and put out one or two items in June!

I have to say that I cant give measurements for this tutorial, as there are lots of little steps. Truthfully speaking, Ive never measured how much I put in each soap, as Ive always eye-balled it (sorry)!

s2

DIY Layered Santa Soap

  • Clear Melt and pour base – I use Stephenson
  • White Melt and pour base – you will need more white than clear
  • Mica powders (I use red and green) – do not use food colouring as this is not suitable for skin contact
  • Castor oil (or avocado, apricot kernel or almond old) – I use roughly 1-2% oil
  • Essential oil (Peppermint, pine, any holiday scent will work but avoid colours which make discolour the white base – see step) – 1% of overall weight to be used in essential oil, if you have 100g of base, use 1g of essential oil
  • Cellophane or any other kind of plastic to wrap your soaps in
  • Santa mould – I bought mine of Ebay but go wherever suits you
  • Soap moulds – I found Tupperware that suited the size that I needed to fit in Santa
  1. First you need to create your Santa embeds. Melt down a small amount of white soap base and add in the mica. As I only have 1 mould, I spend an evening creating the Santa embeds. I do not add any essential oils to them, I just use the base and mica powder. Once Ive popped them out of their mould, normally I have a bit of excess base around the edges(antlers, toy bag, hooves, etc) and I trim them with a toothpick (second picture). I follow standard melt and pour melting technique of melting it for 20-30 seconds at a time (even around 15 seconds) in a microwave, covered with cling film. I then stir in the mica powder until I get the desired colour and then pour into the mould. I then spray with alcohol to dissolve the air bubbles.

s17s16

2. Let your Santa embeds sit for at least 24 hours before you use them in creating your layered soaps. Please also ensure that the mould for your layered soap is big enough put fit whatever shapes you are putting in it. Ive found the Santa mould is slightly longer than standard bar soap moulds you purchase and I found a Tupperware box that suits the size I need. You will want whatever mould you choose to be flexible and made either of plastic or silicone, which will help with releasing the final bar of soap.

3. Melt the clear base and pour it half way into the depth of the bar of soap that you’d like to have. Following standard melt and pour melting technique of melting it for 20-30 seconds at a time in a microwave, covered with cling film. Spray alcohol over this once done (second picture). You need the temperature to be at approximately 120-125F, this will stop the embed melting when added on top.

s11s12

3. Spray again with alcohol and add on your Santa embed. This is where temperature makes a difference (120-125F), Ive ruined a number of soaps this way (see below). Spray again with alcohol. You will see that the Santa drops into the clear base, this is what you want, it should not sit on top of the clear base.

s7

When it doesn’t go to plan: below is what it looks like when you wait too long, you will see a film starting to form over the clear base, NOT good (go ahead and remelt, do not use it in its current state for layering). I thought I was better than the film, as you can see, I was not. When I put Santa on top of the clear base, it sat on top of the base, which is NOT good and then wrinkled when I push it in a bit. The second photo shows how much this does not work when it’s layered. It created air pockets between the clear and mould, when I added in the white base, it filled these air gaps. It also shows the how the film that had formed distorts the Santa and makes it less clear.

s9s1

4. Let the Soap and clear base sit for a few hours before adding on the white base. Even with the lower temperatures, you want to ensure there isn’t a tie-dye/bleeding effect. Melt your white base and add in the oil and essential oils (please note that EU regulation states that you should not use more than 1% of essential oils), spray the clear base with embed with alcohol and pour over the white base mixture. Spray with alcohol. Allow to set over night or several hours before removing from mould.

s2

5. Wrap your soaps after they have set in either cellophane or a plastic of some sort. I completely forgot to take pictures of the soaps before I wrapped them! These were my finished soaps. The green top soaps are where I screwed the process and let the white layer set before adding in the embeds, the red soaps are the happy soaps where everything went to plan.

s3

Tips: Use an essential oil which will not discolour your base. I thought I was being clever (which normally means I’m not) and used cherry and vanilla for a number of soaps, within hours the discolouration started and its only gotten darker. You’ll see the top 5 soaps are darker than the bottom soaps, this is where I used the cherry and vanilla essential oils… They have since gotten much darker! For the bottom soaps I used peppermint and pine. (I also made coffee soaps as you can see, no guessing what home made soaps everyones getting this year) 🙂

s1

I hope this tutorial inspires your Christmas soap creations! Please borrow/steal my idea and share with friends. Id love to see Santa soaps in June!

Remember to share with friends! 🙂

Citrus Shower Steamers

I’m in love with shower steamers, a few weeks ago I posted about Shower Steamers for congestion. They work really well and I even use one in the shower if I’m not congested. I’ve gotten a lot of postive feedback on them and they seem to perfect for winter (and a great party favour!).

I decided to make a alternative that isn’t specific for congestion. Ive decided to go for a blend of citrus, a burst of freshness in the shower. Shower steamers really work based on aromatherapy and citrus is awesome with lots of benefits. Several benefits to citrus essential oils are, they can help to alleviate headaches and fever, are a quick mood enhancer, can relieve fatigue and relieve seasonal allergies. Thus making citrus oils a awesome win! I think these shower steamers are great for people who take showers in the morning, they will give you a boost to start the day off right.

1519760580156

Citrus Shower Steamers

Makes: Approximately 60 small cubes  Prep time: 10 mins  Making time: 10 mins Setting time: 5-8 hours (best over night)  Total time: 5 hours 20 mins minimum

  • 1 cup Baking soda
  • 1/2 cup Citric Acid
  • 1/4 cup rubbing alcohol
  • 1 teaspoon menthol crystals that have been dissolved in 2-3 teaspoons of rubbing alcohol (not to be left out, these are the MAGIC ingredient that makes these so good)
  • 1 teaspoon sweet orange essential oil
  • 1/2 teaspoon lemon essential Oil
  • 1/2 teaspoon lime essential Oil
  • Mica- colour of your choice, I went for light orange (optional)
  • Mini ice cube tray – I bought mine on Wish
  • A seperate small cup disposable cup for your menthol crystals (seriously the crystals will continue to grow and its best to have something you can throw away or purposely dedicate just to THIS project)

For safety purposes you should also have: dust mask and gloves

1. Take your teaspoon of menthol crystals and dissolve them in 2-3 teaspoons of rubbing alcohol. They wont just dissolve on their own, you will need to stir them, it will take a few minutes. I tend to give them a bit of a crush before I mix them in the alcohol, I assume I’m making my life easier by doing this. I use a toothpick or straw to stir. As the menthol WILL form crystals on the cup and whatever you are using to stir it with, make sure that you have no commitment to said item and its disposable (as per the right picture, its the same cup I use for this recipe, forming crystals). Menthol crystals are NOT water soluble, so simply crushing them up and adding them to this mixture will not work or give you the desired results.

2. Put on your mask and gloves. In a bowl, combine your citric acid, baking soda and mica (if using), breaking any lumps. I put mine through a sieve to help with lumps. Give it a good mix with your hand, this helps to evenly disperse the colour (wont lie, forgot this step and it did make a difference at the end when mixing).

3. Add in your essential oils and crystal menthol mixture and mix throughly. At this point your mixture is either ready to use or isn’t. If you are able to get it to form in your hand when you squeeze it, you’re on to a winner (far right picture). If it doesn’t hold it form when you squeeze it, then add in the rest of your rubbing alcohol, mix again and it should now hold its form when you squeeze it.

4. Now to put the shower steam mixture in your moulds. Try for the middle of the mould and work your way out. Ensure to press your mixture into each individual mould, you want it to be packed in and solid, I use my thumb to press in the mixture in EACH individual mould.

5. Leave them to dry, honestly I think over night is best. If you’re in a rush or made them in the morning, give them at least 5-6 hours to set. As it is alcohol which was used to combine them, it will evaporate on its own over time.

6. Once dry, turn out and ideally place them in a air tight box/container. Ive got mine in jars in my bathroom. You want to keep them dry from humidity. You can also make gifts with them and put them in clear bags (10 per bag) and jars (25ish per jar), with the following instructions:

TO USE: Place 1-3 steamers on the floor of your shower, where it will get wet but not directly under the water. Let the aromas clear your sinuses/congestion as you breathe in deeply. Store in an airtight container. Humidity will cause them to break down. Use within 1 month for best scent and results. WARNINGS: Not to be used in the bath as a bath bomb or to have direct contact with skin. Keep out of reach of children.

20180226_150452

These are my shower steamers, the white ones are for congestion and the orange are the citrus. Ideally Ill have matching jars but this is what happens when you go to the store for matching jars, get to the till to pay and realise you’ve forgotten your wallet on the sofa.

Notes: These are not bath bombs and should not be treated as such, whilst the ingredients are similar, I wouldn’t recommend or tell anyone to use them in the bath, if you want a bath bomb, make/buy a bath bomb, if you want a shower steamer, then THIS is the recipe for you!

Other shower steamers/melts/fizzy/bomb use water in it, why doesn’t this recipe? This is a conscious choice that I have made NOT to use water. Water, no matter how much, reacts with the citric acid causing it to fizz and puff instantly, adding too much water can RUIN any steamers/melts/fizzy/bomb recipe, which is something that I have done MORE than once.

Remember to save some for yourself and share with friends! 🙂